What is 1/8 inch on a ruler?

Fraction, Decimal, and Millimeter Equivalent Measurements

Fraction Decimal Millimeters
1⁄8“ 0.125 3.175
3⁄16“ 0.1875 4.7625
1⁄4“ 0.25 6.35
5⁄16“ 0.3125 7.9375

What does a 1/4 inch ruler look like?

If you counted in 1/4 inches on a ruler, you’d see that the fourth line after 0 inches equals 1/4 inch, the eighth line equals 2/4 (1/2) inch, and the 12th line equals 3/4 inch.

What does an 8th look like on a tape measure?

Most standard tape measures in the U.S. have markings that measure down to 1/16 of an inch. On some tapes, quarter inch marks are the same size as eighth-inch marks. Remember that two sixteenths of an inch equals one eighth, two eighths of an inch equals one quarter, and 2 quarters equals one half.

What does 3/8 look like on a ruler?

The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.

What is 1/8 of an inch on a tape measure?

The 1/8-inch mark is located between any two 1/4-inch marks. Most work tends to stop at this point, though in some cases you will need to measure down to the 1/16-inch mark. The 1/16-inch mark is the absolute shortest line on the tape measure.

What is the percentage of 1 8?

Therefore, the fraction 18 is equivalent to 12.5% .

What is 1/8th called?

Conversion table Inches to mm

Dimensions — Inches to Metric Dimensions — Metric to Inches
Decimal Inches Fractional Inches Decimal Inches
0.125” 1/8” 0.079”
0.188” 3/16” 0.118”
0.250” 1/4” 0.126”

How large is an 8th?

Quite simply, an eighth weighs an eighth of an ounce — hence the term — which comes out to about 3.54 grams, if you’re metrically inclined, and often just a flat 3.5 grams, at least on the street.

What is the whole number of 3 8?

3/8 as a decimal is 0.375.

What are the measurements of a ruler?

Standard rulers have inches on one side and centimeters on the other. A typical ruler measures up to 12 inches, and is equivalent to 30.48 centimeters. This is also equivalent to 1 foot.

How is a standard ruler divided up name?

How a standard ruler is divided up Name: Period: The standard ruler is broken up into even sections. The inch in broken up into halves, quarters, eighths, and sixteenths. You can tell what division each is by the length of the line. The smaller the division, the smaller the line is. The following figures show this break down..

What are the markings on a ruler?

The markings on a standard ruler represent the fractions of an inch. The markings on a ruler from the start to the 1″ mark are: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, 15⁄16“, and 1”.

How many inches are on a ruler?

A standard ruler is 12 inches or 1 foot long. standard rulers measure 1 yard or 36 inches. A ruler that is 36 inches long is called a yard stick.