How much does it cost to shorten a driveshaft?

Paid about $100 to have one shortened and balanced, and about $400 to have another lengthened and balanced.

Can I shorten a driveshaft myself?

They take a diegrinder with a 3″ cutoff wheel (or a hacksaw) and cut thru the weld at the cast end of the driveshaft. Knock out the cast end. Then a cut is made for the correct length of the shaft (hollow tube). It is good if this cut is straight, but not critical.

Can you shorten an aluminum drive shaft?

aluminum drive shafts can be shortened but the company that does it has to have special equipment and qualified people.

How much does it cost to cut and balance a drive shaft?

The cost to balance a driveshaft, like most car repairs, will depend on the mechanic/dealership you choose and the car you drive. From what we researched via multiple quotes online, the average driveshaft balancing, including professional labor, tends to be in the $120 to $185.

Can you lengthen a driveshaft?

To lengthen an existing drive shaft you need re-tube the drive shaft. First you will need to cut the weld yoke and stub off of the existing drive shaft. Then press in the new section of tubing into the old weld yoke and stub and re-weld the components onto the new tubing. Finally, the shaft must be balanced.

Can a drive shaft be welded?

Friction welding provides a high-strength, cost-effective solution to join drive shafts together. The result is complete metal fusion without the need for fluxes, fillers, gasses, or an external heat source. The joining of dissimilar metals is possible where conventional methods may not work. …

Can you extend a driveshaft?

How can I tell if my driveshaft is out of balance?

Signs of a bad driveshaft/drivetrain

  1. Vibrations from under the vehicle. A common symptom of a failing driveshaft is an intense shaking coming from underneath the vehicle.
  2. Difficulty turning.
  3. Loud clunking noise.
  4. Car shudders upon acceleration.
  5. Squeaking noise.
  6. Clicking or knocking noise.

Can a drive shaft be fixed?

Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200.

How much does it cost to fix a drive shaft?

How much does it cost to replace drive shaft?

Let’s talk about what happens when that drive shaft stops working properly. Depending on the kind of car you have, this can be a relatively inexpensive procedure, or it can cost quite a bit. On the low end, expect to pay about $300. On the high end, the cost can be as much as $2,000.

How do you balance drive shaft?

To field balance a driveshaft, raise vehicle parallel to the ground so that the vehicle can be started and the tires and wheels can rotate freely. Measure about six inches from the yoke end, and place four marks 90 degrees apart around the driveshaft. Number them so that they can be identified.

What is shaft repair?

Shaft Repair Prepare the shaft by undercutting the worn area according to the following guide: shaft diameter 1/2″ to 1″-1/16 undercut; 1″ to 3″-1/8″ undercut (Fig.1). Cut a thread pattern into the shaft, shallow on small diameter shafts, deeper for larger diameters (Fig.2). Clean thoroughly with Metal Prep II™ Degreaser.

What is drive shaft service?

DRIVE SHAFT REPAIR SERVICES. A drive shaft is a mechanical rotating tube that transfers torque from a vehicle’s transmission to the differential of a vehicle. Drive shafts transfer a tremendous amount of torque and load with twisting force and high speed vibrations. Drive shafts must remain light weight, strong and vibration free to power your vehicle smoothly.