By 5 min read

How do you reset the service light on a Volkswagen Jetta?

Step 1: Procedure

  1. Turn the ignition on.
  2. Press and hold TRIP button on the wipers stalk (right side of the steering wheel).
  3. Use the TRIP buttons to navigate and OK/Reset button to cinfirm. Go to SETUP → Service interval → Reset and confirm the reset procedure.
  4. Turn the ignition off.

How do you reset the service light on a 2012 Volkswagen Jetta?

How to Reset Oil Light: Volkswagen Jetta 2011-2016

  1. Turn the ignition off.
  2. Press and hold the 0,0 button (located to the right of the instrument cluster).
  3. Turn the igntion on (do not start the engine) and release the 0,0 button.
  4. Briefly press the double square button (located to the left of the instrument cluster).

What does service light mean on VW Jetta?

Yellow or Orange lights are serious but not critical. They are indicators that your Jetta requires service as soon as possible: ABS: This light indicates an issue with the anti-lock braking system that requires immediate attention. Check Engine Light: There’s a problem with the engine.

How do you reset the service light on a 2013 Volkswagen Jetta?

To reset the oil life on a 2013 volkswagen jetta turn off ignition, press and hold 0,0 button, turn the ignition on, release 0,0, button then press the double square button and turn the ignition off and back on.

How do you reset the oil life on a 2017 Jetta?

To reset the 2017 volkswagen jetta oil light turn off the vehicle, press and hold the 0,0 button, turn the ignition to the on position with the engine off, then release the 0,0 button, then press and release the clock minute set button labeled min and the system will be reset.

How often do Volkswagens need oil changes?

10,000 miles
According to the Volkswagen site, Volkswagen recommends that you change your vehicle’s oil every 12 months or 10,000 miles, whichever comes first. That means that if you drive less than 10,000 miles per year, you can just set a recurring annual date to get your oil changed and should be good to go.

Will VW check engine light reset itself?

Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. But the issue may be a bit more involved than simply resetting it. The issue may stem from your car having to run several cycles.

How to reset service due wrench light on VW Jetta?

1 Turn ignition to the OFF position 2 Press and hold the TRIP reset button (next to the speedometer on the instrument cluster) and turn the ignition to the ON position 3 The display will show “OIL” or “INSP” 4 Release the TRIP button

How to reset your VW service light by model year?

How to Reset Your VW Service Light by Model Year 2006-2015: Turn your key into the on position 2000-2005: Turn ignition to off position 1993-1999: Turn the key into the on position 1990-1992: Your Volkswagen service button must be reset with a scanner at your local Volkswagen dealership or service center.

How do you reset the oil wrench light on a Volkswagen Beetle?

Turn the key into the ON position. Select the “Settings” menu with the controls located on either the windshield wiper arm or the steering wheel. Select the “Service” submenu and then select the “Reset” option and then press the OK button to reset the display.

How do you reset the VW Jetta ignition?

Press “OK.” Select “Reset Inspection. ” Press “OK.” After each selection, you’ll get a message asking to confirm. Press “OK” and confirm the resets. Turn Ignition OFF. The Volkswagen Jetta is a compact car/small family car manufactured and marketed by Volkswagen since 1979.