By 6 min read

How do I mirror port on HP ProCurve?

Configure HP ProCurve Switch

  1. Open a monitor session on the switch.
  2. Enter configure mode configure terminal.
  3. Enter the configuration mode for the specified Ethernet interface you want to mirror to mirror-port
  4. Set the interface to monitor int , monitor.

What is port mirroring in HP switch?

FIX: Port Mirroring: Port mirroring sends a copy of all packets sent and/or received on one port (the source port) to another port (the destination port) for monitoring and analysis by an external network analyzer. Multiple switch ports can be configured as source ports, with each port mirrored to the same destination.

How do I configure port mirroring?

Enable port mirroring on your switch

  1. In Dashboard, navigate to Switch > Monitor > Switch ports.
  2. Select one or more ports to be mirrored.
  3. Click Mirror:
  4. Specify the destination mirror port, which will be used to capture traffic on the source ports.
  5. Click Create port mirror:

What is port mirroring in security?

Port mirroring is used on a network switch to send a copy of network packets seen on one switch port (or an entire VLAN) to a network monitoring connection on another switch port. It helps administrators keep a close eye on network performance and alerts them when problems occur.

How do I enable port mirroring on my HP switch?

Open a browser software, enter the IP address of your Switch and access the HP Switch web interface. On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed. Access the Device menu, and select the Port Mirroring option.

Is port mirroring same as port forwarding?

Port mapping, also called port forwarding, is used to forward an IP address of LAN to the WAN, or forward an IP address from WAN to the LAN. Thus, port mapping is a process of data forwarding, while port mirroring is a process of data copying.

What is SPAN port?

A SPAN port (sometimes called a mirror port) is a software feature built into a switch or router that creates a copy of selected packets passing through the device and sends them to a designated SPAN port. Using software, the administrator can easily configure or change what data is to be monitored.

How do I know if port mirroring is working?

In general, users can verify port mirroring results by the software of capturing packet. Run the software on the monitoring device, the configuration succeeds when obtaining the packet sent or received by the source port.

Do all switches have port mirroring?

With port mirroring enabled, the switch sends a copy of all network packets seen on one port (or an entire VLAN) to another port, where the packet can be analyzed. Port Mirroring function is supported by almost all enterprise-class switches (managed switches).

Is Port Mirroring same as port forwarding?

How to turn on port mirroring on HP ProCurve 2500?

Just go to “Monitor port” under “Configuration” and follow your nose. 12-06-2005 04:29 PM 12-06-2005 04:29 PM Yes!!!! of a single VLAN configured on the HP ProCurve 2500 Series Switches. 1. Assign port as the monitoring port: 2. Select ports or VLAN for to turn monitoring ON: 12-06-2005 06:50 PM 12-06-2005 06:50 PM Thanks every body

How many ports does a HP ProCurve switch have?

The J4900B HP ProCurve 2626 switch has 24 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX); 1 RS-232C DB-9 console port; 2 dual-personality ports – each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base- TX;

How to monitor network traffic through HP ProCurve switches?

How to monitor network traffic through HP ProCurve switches 1 Open a monitor session on the switch 2 Enter configure mode configure terminal 3 Enter the configuration mode for the specified Ethernet interface you want to mirror to mirror-port 4 Set the interface to monitor int , monitor More

How big is a HP ProCurve 2600-pwr backplane?

13.6 Gbps (ProCurve 2650 and 2650-PWR)/9.6 Gbps (ProCurve 2626, 2626-PWR, 2600-8-PWR) backplane: wire-speed non-blocking architecture for low-latency throughput Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes–including one default route–in IP networks