How do I log into my Westell router?

Westell Router Login Open your web browser of choice and type IP address of your Westell router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

How do I find the password for my Westell router?

The default Westell username is “admin,” and the default Westell password is “password.”

How do I reset my Westell modem?

How do I reset my Westell VersaLink 7500 gateway to its factory settings?

  1. Hold the reset button on the back panel of the VersaLink 7500 gateway for 30 seconds.
  2. Your VersaLink 7500 gateway is now using the default settings for the network configuration.

How do I setup my Westell modem?

Westell DSL Modem network setup

  1. Enter your user name and password.
  2. Next Click Edit on the row that has PPPoE listed in the Protocol column and Enable in the Status column.
  3. In the Protocol field select Bridge from the dropdown list.
  4. Verify that the Mode field is also set to Bridge then click on the set VC button.

How do I setup my Westell 327W router?

Westell 327W Setup

  1. Click on Profile Editor. At this point it will likely ask you log in with the new username and password.
  2. Click edit for the connection My Connection.
  3. Enter the PPPoE username in Account ID. (
  4. Enter the PPPoE password in Account Password. (
  5. Select “on demand”.
  6. Click save and OK.

How do I update my firmware on my Westell 7500?

Click on “web update now” if you are connected to the Internet. Otherwise, click “local update now,” then browse and find the downloaded firmware update file from the Westell site. Select the firmware update file, then click “upload file” to update the firmware.

Is Westell 6100 a wireless router?

The 6100 is a modem/router combination unit, meaning it contains a DSL modem and a general purpose NAT (Network Address Translation) router. “Bridging” means disabling both the public and private side of the NAT router, thereby turning the 6100 into a simple DSL-to-Ethernet bridge, or “dumb modem”.

How do I make my DSL wireless?

How to Add WiFi to My DSL Internet

  1. Purchase a wireless router online or at an electronics store.
  2. Disconnect your DSL or cable modem from its power source while leaving it connected to the Internet.
  3. Disconnect your DSL or cable modem from your computer.
  4. Plug in your DSL or cable modem and turn it on.

What is a Westell VersaLink Model 327w?

Product description. Westell Versalink Model 327w Wireless Router: The VersaLink Gateway has been awarded the Wi-Fi Alliance’s Wi-Fi Multimedia (WMM) Quality of Service (QoS) certification, indicating an improved user experience for audio, video and voice applications.

How do I know if my router has the latest firmware?

Click Advanced > Software > Software Version. This is your Firmware version. See “Software Version” at the bottom of the page.

How do I connect to my Westell modem?

Modem setup. To access your modem settings, open a web browser and go to http://192.168.1.1 or http://10.0.0.1. In the Westell settings site, you can select from five tabs for different setup options.

How do I set up my Westell modem?

In the Westell settings site, you can select from five tabs for different setup options. Click on each topic below for an overview. For additional help, contact tech support. 1. Under the Wireless tab, select Basic Setup.

What are the features of the Westell 7500 router?

The Westell 7500 modem and WiFi router has the following features and capabilities: 2.4 GHz b/g/n; ADSL / ADSL2+; Wireless 802.11b/g/n Works with CenturyLink services at speeds up to 20 Mbps download by 1 Mbps upload (ADSL/ADSL2+ only)

How to login to 10.0.1 admin page?

To login to 10.0.0.1 you can follow these steps. Type http://10.0.0.1 in the address bar of internet browser and press enter. Access the router management interface by using your username and password on that page. In case you do not know the username and password, you can find the information from the router model.

How to get admin password for router 10.0.1?

Any router that uses the 10.0.0.1 IP address can easily be connected. Open the web browser of your choice (Google Chrome, Mozilla Firefox, Internet Explorer etc.) and open the URL of your router. Once the router’s web page is loaded, you can request for the router admin console from which you can ask for username and admin password.