By 7 min read

How do I fix my parrot MKi9200?

How to reset a Parrot MKI9200

  1. Turn on the MKi9200.
  2. Press the centre button on the remote and rotate until you get to “Settings”
  3. Enter Settings menu and navigate down to “Advanced Settings”
  4. When in Advanced Settings menu select “Factory Reset” and press the centre button on the remote.
  5. The MKi9200 will now re-boot.

Can you use Parrot MKi9200 without remote?

The Parrot wireless remote control is used to access the settings menu on the MKi9200. This means that you cannot reset the MMi9200 without the remote. The only exception to this is if you have the Unika steering wheel interface instead of the remote, in which case it is possible.

How do you reset a Parrot kit?

How to reset a Parrot MKi9000

  1. Turn on the MKi9000 and wait about 20 seconds for the kit to fully turn on.
  2. Press the centre button on the remote and rotate until you get to “Settings”.
  3. Press and hold the RED and GREEN buttons on the remote control for 2 to 3 seconds.

Why is my car Parrot not working?

This may be one of two issues: Check to make sure that the fuse on the battery line is still good and the battery line connections are still good. Check to make sure that the battery line is in fact connected to the battery and not also tied in with the ignition line.

How do I update my parrot MKi9200?

On the MKi9200 go into Settings / Advanced / Firmware Update and press centre button to confirm. Within a minute you should see “update in progress” on the MKi9200 screen. After a minute or two the screen will go blank and this is when the unit is being re-programmed.

How do I increase the volume on my parrot MKi9200?

To adjust the volume of the Parrot MKi9200, press the jog wheel and select Settings > Audio > Menu Volume. Use the jog wheel to adjust the desired volume then validate.

How do I clear the memory on a parrot?

Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion. Repeat this process to remove all paired phones not required.

How do you clear the memory on a Parrot hands-free?

As there is no dedicated reset function you can accomplish this in one of 3 ways: 1. Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion.

How can I make a call from my parrot?

How to make a call using voice recognition

  1. Press the green button or say “Phone” if this key word is saved.
  2. After the beep, state the name of your contact.
  3. Parrot CK3100 repeats the name in case of a mistake, and if necessary allows you a second attempt after a beep.

How do I update my Parrot software?

Installing the update file

  1. Start up the Parrot hands-free kit and select Preferences > Update.
  2. > Parrot MKi will say “Waiting for update”.
  3. Connect your USB drive to Parrot MKi using the iPod / USB / jack cable.
  4. >
  5. Wait approximately 3 minutes until the message “Update successful” displays.
  6. Wait until Parrot MKi restarts.

How can I Reset my parrot mki9000 remote?

Reset the Parrot MKi9000/ MKi9100 and MKI9200. For the MKi9000 do the following: Turn on ignition and wait approx 30 seconds for the kit to turn on. Press and hold for 2 to 3 seconds the RED and GREEN buttons on the remote at the SAME TIME.

Why is my parrot mki9200 not playing music?

Connection for mine has been dead on. S7 and the 9200 and it makes calls, plays music, connects automatically. The only issue I’m having with mine is the USB and iPod connectors don’t seem to work. I’m on a very old firmware version and can’t upgrade it as the USB doesn’t power up. Could it be a nipped wire somewhere in the dash?

What kind of adaptors do I need for parrot mki9000?

Pioneer Stereos Double DIN Sony Stereos Double DIN JVC Stereos Single DIN Kenwood Double DIN JVC Stereos Double DIN Bluapunkt Single DIN Stereos Kenwood Single DIN Stalk Interfaces Patch Leads Peugeot Stalk Adaptors Citroen Stalk Adaptors Toyota Stalk Adaptors Audi Stalk Adaptors Saab Stalk Adaptors Mercedes Stalk Adaptors Renault Stalk Adaptors

How to install a remote control on a parrot?

Parrot MKi9200 – User guide 10 Installing the remote control on the dashboard If you want to place the remote control on the dashboard, stick the double-sided tape located on the flat side of the bracket to fix it against the dashboard. You can then insert the remote onto the bracket.