How deep is a deep socket?
A deep socket will generally be around one inch long. This will allow you to use a socket wrench in inaccessible places, especially if you have an extension on the driver.
What size is a 19 socket?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 16mm | 13mm | 19mm |
| 17mm | 14mm | 20mm |
| 18mm | 15mm | 21mm |
| 19mm | 22mm |
What is 19mm socket?
19mm Metric Deep Impact Socket is engineered and constructed to endure high torque application with impact wrenches. This impact socket is specially designed to engage with the flats of fasteners to prevent rounding so it’s time to turn up the torque and turn tough jobs into easy ones.
Is 19mm socket the same as 3 4?
19mm = 3/4 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
What is a deep socket for?
Deep sockets are useful for turning nuts onto bolts when the bolt extends upwards into the socket (as in the case of many bolted joints), a very typical example being exhaust clamp bolts on a car.
Do they make extra deep sockets?
Some jobs call for custom/special tools like our Extra Deep Impact Sockets. Threaded rods and bolts in deep spots are reached easily and readily with these extra long sockets. We offer extra deep impact sockets with 3/8”, 1/2”, 3/4″ ,1”, 1-1/2”, and #5 spline drives.
How do I know my socket size?
Drive Hole indicates the size of the drive hole (also referred to as the “driver hole” or “square hole”), which determines the torque size of the driver tool you’ll need. For example, you’d use a ½-inch drive socket with a ½-inch drive ratchet. L indicates the overall socket length.
What are the socket sizes?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What’s the same size as a 19mm?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 19mm | 0.748 | |
| 3/4″ | 0.75 | |
| 25/32″ | 0.781 | |
| 20mm | 0.787 |
What size is 19mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
| 18mm | Just short of 3/4 Inch | 0.70866 Inches |
| 19mm | Little under 3/4 Inch | 0.74803 Inches |
| 20mm | Just short of 13/16 Inch | 0.78740 Inches |
Will 3/4 wrench work for a 19mm?
No, there’s no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.
What SAE socket is close to 19mm?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 23/32″ | 0.719 | |
| 19mm | 0.748 | |
| 3/4″ | 0.75 | |
| 25/32″ | 0.781 |