Do deep cycle batteries need special charger?
Deep cycle batteries provide a controlled flow of power so that it remains active for a significantly longer period of time. To charge these batteries, you will need a special type of battery charger called a deep cycle battery charger.
How do you charge a 12 volt deep cycle battery?
Set your battery charger to a slow or trickle charge and select whether you are charging a 6, 12 or 24 volt deep cycle battery. If your battery charger has the option to set the voltage for the charge, set it to 20 percent of the rated amp per hour rate of the battery you are charging.
Can you use a regular battery charger on a deep cycle battery?
Using a traditional battery charger to recharge your deep cycle battery will not give you the best possible results. This is because excess heat is produced whenever a battery is charging. A deep cycle battery is not designed to handle the rapid charging and extra heat, so it may never reach full capacity.
What amp battery charger do I need for a deep cycle battery?
Consequently, when trying to charge a larger battery at that rate, it will take a very long time and the battery may discharge at a greater rate than the 2-amp charge can provide. It is better to charge a deep cycle battery at a higher charge rate like 6-amps, 10-amps or higher.
How long should I charge a deep cycle battery?
A charger with 15 amps, for instance, will take about two hours to fully charge a battery at a 25-percent discharge value. Chargers with only 5 amps, however, will need a full six hours with the same battery.
How long does it take to charge a 12 volt deep cycle battery?
It usually takes around 4-6 hours In most cases, a marine battery will take around 4-6 hours to charge. This will bring your battery from 0% charged to 80% charged. In addition, it depends on the type of charger that you’re using.
How long does it take to charge a deep cycle battery at 12 amps?
In most cases, a marine battery will take around 4-6 hours to charge.
What voltage should I charge my deep cycle battery?
Charging – Flooded Types Deep Cycle Batteries in a cycling application require a recharging voltage of 2.43 to 2.45 volts per cell.
How fast should you charge a deep cycle battery?