Is the 1HD FTE engine good?
The 1HD-FTE is a very reliable engine as are most of the 1HD-XXX family of Toyota engines. The single most important thing is to get evidence of regular engine oil and engine oil filter changes. Both should be done at 5000 Km intervals. Otherwise the timing belt is due at 150 000 Km’s.
What cars did the 1HD FTE come in?
Introduction
| Engine | Years | |
|---|---|---|
| Toyota HDJ100 LandCruiser | 4.2-litre turbo diesel I6 | 2000-02 |
| 2002-07 |
What is the difference between the 1HD-T and 1HD-ft?
I have had both of these engines and by far the 1HD-FT has more power and runs better than the 1HD-T. The FT has 24 valves instead of 12 and makes a huge difference on the power it produces and when it produces it.
How much boost can a 1HD FTE handle?
1100 – 1250 PSI max.
Whats better Td42 or 1HZ?
Td42 has a higher threshold for power mods than the 1hz, however with maintenance both are supremely reliable and long lived, the patrol has a much tougher drive line, particularly the front diff as mentioned and their LSD is much better also, but all of the above can be remedied, I’m a Nissan person but almost bought …
Can you turn a 1HZ into a 1HDT?
Unfortunately 1HDT and 1HZ heads are not interchangeable, without changing the complete fuel system, pistons and con rods. You can only use on both engines are the block and the crankshaft. What you can do is use 1HDT conrods, as they are stronger and use the 1HZT pistons, and upgrade to a better stronger 1HZ turbo.
What kind of engine does a Toyota 1HD-FT have?
The Toyota 1HD-FT is a 4.20 six cylinders, four-stroke cycle water-cooled turbocharged internal combustion diesel engine, manufactured by the Toyota Motor Corporation.
What kind of engine is in Toyota Land crusier 1HD-FT?
The 1HD-FT is a 4.2 L straight-6 24 valve SOHC turbocharged diesel engine of direct injection design. The 1HD-FTE is a 4.2 L straight-6 24 valve turbocharged diesel engine. The non-intercooler version powers HDJ78 Troop Carrier and HDJ79 Utility versions.Output is 164 hp (122 kW; 166 PS) at 3,400 pm with 380 N⋅m (280 lb-ft) of torque at 1,400 rpm.
What does 1HD FTE mean in Toyota turbo diesel engine?
The injection side of things amounted to a change to electronic control of the injectors and a more sophisticated fuel-injection pump.
How big is the intake valve on a Toyota 1HD FTE?
Intake valves are 33.0 mm (1.2992 in) in diameter, and the exhaust valves are 30.5 mm (1.2007 in). Intake duration is 216° and exhaust duration is 246°. The 1HD-FTE engine has an aluminum intake manifold and cast iron exhaust manifold that was mounted on a five-layer steel laminate type exhaust manifold gasket.