What is the difference between a 727 and a 904 transmission?
The 727 was the only available automatic transmission for big block cars. You could get a 727 for a small block, which where mostly for 340’s and 360’s or you could get a 904 which was primarily for the 318. 727 is a much heavier duty transmission and can really take a beating.
What vehicle has a 727 transmission?
The Chrysler Torqueflite 727 was introduced in 1962 as the replacement to the A-488. For three decades, it was Mopar’s flagship automatic transmission, and an important transmission in the history of Chrysler, as well as Jeeps and other car makers.
How much horsepower can a 727 transmission handle?
The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.
How long does it take to rebuild a 727 transmission?
a competent transmission repair can do a bench rebuild in a couple of hours, 3hrs tops. to remove and replace the trans should take 4hrs. It probably costs less than $300 in parts, unless it’s major broken.
Are 727 transmissions any good?
The 727 is highly adaptable and strong enough to handle 450hp engines. This makes the A-727 a good candidate for installing into your Chrysler, GM or AMC car or truck. The Torque Command “8” was released in 1956 for use in the full-size Chrysler cars. The rest of the Mopar fleet began using this transmission in 1957.
Are all 904 transmissions the same?
Both the 727 and 904 versions of the TorqueFlite are similar in design, although none of the components are interchangeable between the two with the exception of the valve body, though calibration is different.
Will a 727 transmission fit a 360?
If it is a small block 727 any 318/360 will bolt up to it as previously stated. Even the newer Magnum engines. Also the 5.7 Hemi will bolt up to it not sure about the 4.7 motor.
What is a TorqueFlite 727?
The Chrysler A-727 transmission, also known as the TorqueFlite 8 units is a three-speed transmission that was launched around 1956. Its strength meant it could be used in Chrysler cars and non-Mopar applications such as work trucks as well as high-performance vehicles like sports cars.
How does a-727 transmission work?
The A-727 uses a paper fluid filter and has two transmission bands, one for reverse, and the other is a kickdown band. All shift ratios were 2.54:1 for first gear, 1.45:1 for second gear and 1.0:1 for third gear. Reverse gear is 2.21:1.
Does 727 have overdrive?
Overdrive was added to the 727 and the numbers were changed, sometime in the mid 90’s.
How do I identify my Chrysler transmission?
How do I Identify Chrysler Transmissions?
- Determine if the transmission is an automatic or a manual, also known as a standard transmission.
- Go underneath the vehicle to access the transmission.
- Count the number of bolts and view the transmission pan shape on the automatic transmission.
How many gears does a 904 transmission have?
The aluminum 904 was first introduced by the Chrysler Corporation in 1960, and is a design that evolved from the Chrysler PowerFlite, which was a two speed automatic, and then the cast-iron three-speed TorqueFlite which was durable but heavy….Price Tag.
| $275.00 | |
|---|---|
| TCI Outlaw shifter | $350.00 |
| $225.00 |
When did the Chrysler 727 automatic transmission come out?
The Chrysler Torqueflite 727 was introduced in 1962 as the replacement to the A-488. For three decades, it was Mopar’s flagship automatic transmission, and an important transmission in the history of Chrysler, as well as Jeeps and other car makers.
Is the Mopar 727 transmission a good transmission?
It is needful given the many characteristics and advantages that can still be derived from using a transmission that is three decades old. The Mopar 727 is also an excellent transmission to install into your Chrysler, AMC, or GM car or truck; thus, it can serve Chrysler and non-Chrysler applications.
Which is the missing number on a 727 transmission?
Not sure which of the numbers are the date code though. Missing number? usually the next seven after PK is the part number designating the year,,,those don’t match any trans in my book. For example: PK 3515846 xxxx (1970 383 four barrel after 4/27/70) I was under the impression the last “4” digits were the daily sequential numbers. 1.
How big is the transmission pan on a 727?
Measure the pan with a measuring tape. The 727 transmission has an overall length of 15 1/2 inches. Overall width is 11 7/8 inches.