What is meropa 150?
Texaco Meropa 150 is a premium industrial EP gear lubricant which provide very high wear protection and exceptional load-carrying capacity as well as protection against shock loads and micro-pitting. Meropa industrial gear lubricants are designed to protect a wide variety of heavy-duty gear systems and bearings.
What is meropa oil?
Meropa are proven performance extreme pressure industrial gear oils, formulated with highly refined mineral base oils and sulphur-phosphorus additive technology. Meropa lubricants are available in ISO VG 68, 100, 150, 220, 320 and 460 grades.
What is ISO 150 gear oil?
D-A GTD™ gear lubricant is a mild EP gear lubricant designed to meet the lubrication needs of gear trains requiring the use of an extreme pressure lubricant. It is especially well-suited for use in severe service equipment such as rock crushers.
What viscosity is ISO 46?
ISO 3448 Viscosity class
| ISO 3448 Viscosity class | Kinematic viscosity at 40°C [mm2/s = cSt] | |
|---|---|---|
| ISO VG 22 | 22 | 19.8 |
| ISO VG 32 | 32 | 28.8 |
| ISO VG 46 | 46 | 41.4 |
| ISO VG 68 | 68 | 61.2 |
What is viscosity index in oil?
The viscosity index (VI) of a lubricant is the rate of the viscosity change due to a temperature change. To know if a lubricant meets the asset’s requirements based on the operating temperature range, you must understand the VI.
What is meropa68?
Texaco Meropa 68 is a premium industrial EP gear lubricant which provide very high wear protection and exceptional load-carrying capacity as well as protection against shock loads and micro-pitting. Meropa industrial gear lubricants are designed to protect a wide variety of heavy-duty gear systems and bearings.
What is ISO viscosity grade?
ISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant’s viscosity is the single most important factor when selecting the right oil for your machinery.
What weight is ISO 150?
Chevron Regal R&O 150 is an International Standards Organization (ISO) Viscosity Grade (VG) weight of 150, Rust and Oxidation Oil which is also considered a SAE 40 wt. Non-Detergent Oil. * This product was formerly known as Texaco Regal R&O 150 until Chevron acquired Texaco back in 2000.
What weight is ISO 46?
SAE 20
SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100.
What is a good viscosity index?
The lower the VI, the more the viscosity is affected by changes in temperature. The higher the VI, the more stable the viscosity remains over temperature fluctuations….Classification.
| Viscosity index | Classification |
|---|---|
| Under 35 | Low |
| 35 to 80 | Medium |
| 80 to 110 | High |
| Above 110 | Very high |
What is a high viscosity number?
High viscosity oils flow more slowly and come with a higher SAE number. It’s logical to assume that a low viscosity oil is thinner than a high viscosity oil. Sometimes, viscosity is also referred to as an oil’s “weight,” with a heavier oil featuring a higher viscosity grade.