What do I do if my Frigidaire refrigerator is not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
Why is my refrigerator not cooling but the freezer is?
When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
How do I reset my Frigidaire refrigerator?
Press the Power Cool and Power Freezer buttons at the same time, on the display panel. Hold the buttons for a short time. The refrigerator will be reset and the fridge will start cooling again.
How do you know if the compressor is bad on a refrigerator?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
Why is my Frigidaire side by side refrigerator not cooling?
Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
How do you run a diagnostic on a Frigidaire refrigerator?
How to Enter the Diagnostic Mode on a Frigidaire Refrigerator
- Press and hold the “Freezer Temperature UP” and the “Freezer Temperature DOWN” buttons at the same time.
- Release and press the buttons together twice more within five seconds to enter the diagnostic mode to test the Frigidaire.
What are the problems with Frigidaire refrigerators?
One of the most common problems with Frigidaire refrigerators is temperature control. After installing, the refrigerator needs 24 hours to regulate cooling. During this regulating period, homeowners should perhaps store food in another location to avoid spoilage.
How do you troubleshoot a refrigerator that is not cooling?
Look at the Fan. Another common problem when a refrigerator is not cooling is the fan. The fan is what directs the cooled air to the various parts of the refrigerator. Usually, extremely cold air is deposited into the freezer compartment; as the fridge section needs more cooling, the air is directed to that compartment via a simple fan.
How do you reset a Frigidaire refrigerator?
Release the control lock by pressing the “Control Lock” icon for three seconds. A beep will sound, and the icon’s light will go out. Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator’s control panel does not work normally or a reset function on the keypad does not work.
Why is my Frigidaire freezer not freezing?
If you have a Frigidaire freezer that is experiencing this problem, consult your instruction manual to find out where the fan system is in your freezer. You may need to pull the freezer away from the wall and access the back paneling in order to find the source of the problem. Poor freezer circulation can cause uneven cooling.